## Page 1
# CSW24UL SWING GATE OPERATOR
SECTION 32 31 00
> Figure: Product photo of the CSW24UL swing gate operator. A dark gray LiftMaster operator enclosure is shown with a yellow horizontal arm extending from the top left, LiftMaster branding on the upper front and vertical side, and a red control area near the bottom front.
### KEY FEATURES
| | |
|---|---|
| **BATTERY BACKUP** | Up to 24 days of standby power or 146 cycles when the power is down |
| **REMOTE CONTROL ACCESS** | Security+ 2.0® 3-channel receiver will handle up to 50 remote controls (unlimited remotes with 811LM/813LM) |
| **INTERNET CONNECTIVITY** | MyQ® technology monitors and controls the operator through the MyQ app |
| **MONITORED SAFETY INPUTS** | 6 inputs (main and expansion board) |
| **SOLAR-POWER CAPABILITIES** | Yes. Reference detailed solar chart on product page at LiftMaster.com |
| **DIAGNOSTIC DISPLAY** | LED diagnostic display |
| **WIRELESS DUAL-GATE COMMUNICATION** | Eliminates expensive conduit costs and unsightly driveway scars |
| **FIRE DEPARTMENT COMPLIANT** | Allows gate to auto open upon loss of AC power or battery depletion |
| **LIMIT SETTING** | Electronic |
| **DUAL GATE CONTROL** | Bi-part delay or synchronized close |
| **PROGRAMMABLE AUXILIARY RELAYS** | Easily add additional features, such as warning lights/alarms |
| **UNAUTHORIZED ACCESS PREVENTION** | Can be programmed with anti-tailgate or quick close capabilities |
| **HOMELINK® COMPATIBLE** | Version 4 and higher |
### SPECIFICATIONS
| | |
|---|---|
| **OPERATOR SPEED** | 90-degree opening in 15 seconds |
| **POWER** | 120V/230VAC single phase |
| **ACCESSORY POWER** | 24VDC, 500mA output; switched and unswitched power |
| **OPERATOR WEIGHT** | 206 lbs. |
| **WARRANTY** | 5 years commercial, 7 years residential |
| **TEMPERATURE SPECIFICATIONS** | Without heater: -4°F (-20°C) to 140°F (60°C); with optional heater: -40°F (-40°C) to 140°F (60°C) |
| **UL USAGE CLASSIFICATION** | UL 325 & UL 991 listed – class I, II, III and IV |
### CONSTRUCTION
| | |
|---|---|
| **MOTOR** | 24VDC motor with soft start/stop |
| **OPERATOR DUTY RATING** | Continuous duty |
| **CHASSIS/FRAME** | Constructed with 1/4 in. gold zinc-plated steel for rust prevention |
| **GEAR REDUCTION** | 900:1 worm gear reducer in synthetic oil bath |
| **COVER** | High-density, UV-resistant polycarbonate 2-piece cover for excellent heat and corrosion resistance |
| **RECOMMENDED CAPACITIES** | Rated for gates up to 18 ft. in length or weighing up to 1,600 lbs. |
DATA SHEET
SWING GATE OPERATOR
LiftMaster®
## Page 2
# CSW24UL SWING GATE OPERATOR
SECTION 32 31 00
### DIMENSIONS
> Figure: Technical line drawings of the CSW24UL operator, labeled LEFT, FRONT, RIGHT, TOP, and BOTTOM.
>
> **LEFT view:** Overall horizontal dimension 19.63; overall vertical dimension 27.99. The enclosure side shows vertical “LiftMaster” lettering.
>
> **FRONT view:** Overall top width 15.55; bottom dimension 7.87; lower-left vertical dimension 4.31.
>
> **RIGHT view:** Overall horizontal dimension 19.63; overall vertical dimension 27.99. The enclosure side shows vertical “LiftMaster” lettering.
>
> **TOP view:** Vertical dimensions 20.45 and 18.77.
>
> **BOTTOM view:** Horizontal dimension 12.20; vertical dimension 14.00. Internal components are visible in the bottom view.
### CAPACITY
#### BATTERY BACKUP OPERATION
| BATTERY | CYCLES | STANDBY TIME |
|---|---:|---:|
| (2) 7Ah | 146 | 24 Days |
| (2) 33Ah | 876 | 105 Days |
> Figure: Bar chart titled “RECOMMENDED CAPACITY.” Vertical axis label: “POUNDS,” with marks at 0, 600, 800, and 1600. Horizontal axis label: “LENGTH.” Bars show: 8 ft. — 1600 lbs.; 16 ft. — 800 lbs.; 18 ft. — 600 lbs.
© 2018 LiftMaster All Rights Reserved • LiftMaster.com
LMARENDSCSW24U 5/18
LiftMaster®