## Page 1 > Figure: Isometric line drawing of the SL-45DC gate operator. A large exterior plastic cover is shown at upper left, labeled “RIGHT.” An uncovered operator assembly is shown below, with visible chain, sprockets, motor, wheels, frame, and internal boxes. No dimensions, torque values, or wire specifications are shown. | ITEM NO. | DESCRIPTION | PART NUMBER | QTY. | |---:|---|---|---:| | 1 | FRAME ONLY | SL-45FM | 1 | | 2 | GEARHEAD DC MOTOR | MTR-45 | 1 | | 3 | GEARHEAD DC MOTOR MOUNTING BRACKET | MTR-45B | 1 | | 4 | GEARHEAD DC MOTOR SPROCKET | 41B10X58 | 2 | | 5 | MAIN DRIVE CHAIN | 41NPX12 | 1 | | 6 | CONTROL BOX ASSEMBLY | CBX-AY45 | 1 | | 7 | CONTROL BOX | CBX-45 | 1 | | 8 | CONTROL BOX COVER | CBC-45 | 1 | | 9 | CONTROL BOX DC 45 CIRCUIT BOARD | BLDC-ULPCB45 | 1 | | 10 | CONTROL BOX RESET PUSH BUTTON | COM-1004 | 1 | | 11 | CONTROL BOX ALARM BUZZER | COM-1005 | 1 | | 12 | CONTROL BOX RADIO RECEIVER STRIP | COM-1003 | 1 | | 13 | CONTROL BOX BRIDGE RECTIFIER | COM-1006 | 1 | | 14 | CONTROL BOX ON/OFF POWER SWITCH | COM-1000 | 2 | | 15 | CONTROL BOX LINE IN HARNESS | COM-1016 | 1 | | 16 | LIMIT SHAFT AND SWITCH ASSEMBLY | LSA-AY45 | 1 | | 17 | LIMIT SWITCH PLATE | LSP-45 | 1 | | 18 | LIMIT SWITCH | COM-1007 | 2 | | 19 | LIMIT SWITCH WIRE HARNESS | LSH-45 | 1 | | 20 | LIMIT / DRIVE SHAFT | LST-45 | 1 | | 21 | LIMIT SWITCH PLASTIC NUT | COM-1008 | 2 | | 22 | LIMIT / DRIVE SHAFT MOUNT | LST-M45 | 1 | | 23 | LIMIT SHAFT BEARINGS - 5/8" | BRG-6202B | 2 | | 24 | MAIN DRIVE SPROCKET | 41B15X58 | 1 | | 25 | LIMIT TABLE SPRING (2) | SPG-7575 | 2 | | 26 | POWER SUPPLY BOX ASSEMBLY | PSB-AY45 | 1 | | 27 | POWER SUPPLY BOX TRANSFORMER | TFR-45 | 1 | | 28 | POWER SUPPLY BOARD | EMI-PCB | 1 | | 29 | POWER SUPPLY BOX | PSB-45 | 1 | | 30 | POWER SUPPLY BOX COVER | PSC-45 | 1 | | 31 | POWER SUPPLY WIRE HARNESS | PSH-45 | 1 | | 32 | EXTERIOR PLASTIC COVER | EPC-45 | 1 | | 33 | PLASTIC IDLER | COM-1017 | 2 | | 34 | CHAIN BRACKET | COM-1009 | 1 | | 35 | CHAIN BOLT | COM-1010-1 | 1 | | 36 | 7AH BATTERY | BTY-1270 | 2 | | 37 | BATTERY WIRE HARNESS | BTY-H45 | 1 | | 38 | LIMIT STAND | LSD-45 | 1 | | 39 | SET COLLAR | DSC-45 | 1 | | 40 | ACCESSORY SHELF | ACS-45 | 1 | | 41 | BATTERY SHELF | BAS-45 | 1 | **TITLE:** SL-45DC **SHEET:** 1 OF 2 **SCALE:** 1:3 **DRAWN BY:** S. HUERTA **DATE DRAWN:** 08/23/2021 **DRAWING SIZE:** C ALL-O-MATIC, Inc. 7820 Gloria Ave. Van Nuys CA, USA 91406 Phone: (818) 787-1988 EMAIL: fortino@allomatic.net DIMENSIONS ARE IN INCHES BREAK SHARP EDGES .10-.40 MACHINED SURFACE FINISH IS 1.6 MICROMETERS DO NOT SCALE DRAWING THE INFORMATION DISCLOSED HEREIN WAS ORIGINATED BY AND IS THE PROPERTY OF ALL-O-MATIC, INC. AND ALL PATENT, PROPRIETARY, DESIGN, USE, SALE, MANUFACTURING, AND REPRODUCTION RIGHTS THERETO ARE RESERVED BY ALL-O-MATIC, INC. ## Page 2 > Figure: Exploded isometric drawing labeled “LIMIT SHAFT AND SWITCH ASSEMBLY: LSA-AY45” with circled callout 16. Components are separated along their assembly axes and identified by arrows and circled item numbers: 24 main drive sprocket, 39 set collar, 23 limit shaft bearings, 5 main drive chain, 4 gearhead DC motor sprocket, 19 limit switch wire harness, 18 limit switches, 38 limit stand, 20 limit / drive shaft, 21 limit switch plastic nuts, 25 limit table springs, 17 limit switch plate, and 22 limit / drive shaft mount. No dimensions, torque values, or wire specifications are shown. > Figure: Exploded isometric drawing labeled “CONTROL BOX ASSEMBLY: CBX-AY45” with circled callout 6. Exploded components, connected by dashed alignment lines, are identified by arrows and circled item numbers: 7 control box, 8 control box cover, 9 control box DC 45 circuit board, 10 control box reset push button, 11 control box alarm buzzer, 12 control box radio receiver strip, and 15 control box line in harness. No dimensions, torque values, or wire specifications are shown. > Figure: Exploded isometric drawing labeled “POWER SUPPLY BOX ASSEMBLY: PSB-AY45” with circled callout 26. Components are identified by arrows and circled item numbers: 36 7AH battery, 37 battery wire harness, 27 power supply box transformer, 13 control box bridge rectifier, 29 power supply box, 14 control box on/off power switch, 31 power supply wire harness, 28 power supply board, 30 power supply box cover, and 41 battery shelf. No dimensions, torque values, or wire specifications are shown. > Figure: Exploded overall operator assembly drawing. The exterior plastic cover is labeled “RIGHT” and identified by callout 32. The frame is callout 1; gearhead DC motor is 2; gearhead DC motor mounting bracket is 3; gearhead DC motor sprocket is 4; plastic idlers are 33; chain bracket is 34; chain bolt is 35; and accessory shelf is 40. Blue dashed dividing lines separate drawing regions. No dimensions, torque values, or wire specifications are shown. **TITLE:** SL-45DC **SHEET:** 2 OF 2 **SCALE:** 1:3 **DRAWN BY:** S. HUERTA **DATE DRAWN:** 08/23/2021 **DRAWING SIZE:** C ALL-O-MATIC, Inc. 7820 Gloria Ave. Van Nuys CA, USA 91406 Phone: (818) 787-1988 EMAIL: fortino@allomatic.net DIMENSIONS ARE IN INCHES BREAK SHARP EDGES .10-.40 MACHINED SURFACE FINISH IS 1.6 MICROMETERS DO NOT SCALE DRAWING THE INFORMATION DISCLOSED HEREIN WAS ORIGINATED BY AND IS THE PROPERTY OF ALL-O-MATIC, INC. AND ALL PATENT, PROPRIETARY, DESIGN, USE, SALE, MANUFACTURING, AND REPRODUCTION RIGHTS THERETO ARE RESERVED BY ALL-O-MATIC, INC.