## Page 1 LL3A SQUARE POST > Figure: Side-view technical drawing of the LL3A square post assembly. Dimensions shown: 47mm (1 7/8), 26mm (1), 25mm (1), 28mm (1 1/8), 25mm (1), and 60mm (2 3/8). The drawing shows the post, mounting bracket, adjustment mechanism, and lever. > Figure: Top/front technical drawing of the mounting assembly with two elongated mounting slots and a central circular adjustment mechanism. Dimensions shown: 85mm (3 3/8), 52mm (2 1/16), 25mm (1), 47mm (1 7/8), 103mm (4 1/16), and 18mm (11/16). > Figure: Lower side/end technical drawing of the assembly. Dimensions shown: 115mm (4 9/16) and a hole diameter of 5mm (3/16). A curved arrow indicates adjustment direction near the circular mechanism. > Figure: Technical drawing of a rectangular mounting plate with two elongated slots and two small corner symbols/marks. Dimensions shown: 5mm (3/16) and 12mm (1/2). > Figure: Technical drawing of the bracket and mounting plate. Dimensions shown: 86mm (3 3/8), 40mm (1 9/16), 18mm (11/16), and 12mm (1/2). Two elongated mounting slots are shown. A curved adjustment arrow is labeled “[illegible].”