## Page 1 A1101 DoorBird Technology meets Design. > Figure: Drawing of the A1101 IP Video Indoor Station. Screen shows status icons, “09:55”, weather icon, “21°C”, and a door-station selection icon. Below the screen are four buttons: key (Open Door), star (Favorite), crossed bell (Mute), and three horizontal lines (Menu). A microphone button is at lower right. Numbered callouts identify: > 1) Weather Information > 2) Choose Door Station > 3) Button ”Open Door” > 4) Button ”Favorite” > 5) Button ”Mute” > 6) Button ”Menu” > 7) Button ”Enable Listen And Speak” > 8) LED Status Bar (To visualize doorbell events etc.) END USER MANUAL A1101 IP Video Indoor Station www.doorbird.com Errors and omissions excepted. | Last update 08/2020 - Copyright © 2019 Bird Home Automation GmbH – www.doorbird.com ## Page 2 BASIC FEATURES > Figure: Partial drawing of the indoor station, showing the microphone button and the lower button row: key, star, crossed bell, and Menu (three horizontal lines). ### Take/Exit Call During an incoming call the display turns on automatically, the camera view is displayed and the LED status bar lights up. Press: [microphone icon] to start the call with the person at the door station. [microphone icon] lights up during the call. [microphone icon] again to end the call. > Figure: Information box with information icon. > **Maximum call duration: 3 minutes** > After this time has expired, the call is automatically ended. > Figure: Information box with information icon. > **Standby screen after: 3 minutes** > Touch the display or press [Menu icon] to reactivate the screen. ### Open Door Press: [key icon] to open the door. [star icon] may be assigned to a function (e.g. further door opener). If this is not the case, no action is executed. ### Mute The Device Press: [crossed bell icon] to mute the device. [crossed bell icon] lights red while this setting is active. [crossed bell icon] again to switch the tone back on. ### Open Menu Press: [Menu icon] to enter the menu. ### Restart The Device Press: [key icon] + [star icon] + [crossed bell icon] + [Menu icon] simultaneously to restart the device. LIVE-SCREEN > Figure: Live-screen drawing displaying a visitor, status icons, “09:55”, weather icon, “21°C”, and Door Station selection icon. ### Switch Between Live Views You can switch between the live views if there is more than one door station connected to your indoor station. Tap the ”Door Station selection” icon in the bottom right corner to change the station. The reception symbol [signal-strength icon] indicates the connection quality of your indoor station to the door station. > Figure: Weather-information screen with three forecast columns. Labels shown: “20 - 21°C”, “2 mm”, “1010 hPa”, and “06:00 - 12:00” for each column. Weather symbols show partly cloudy, sunny, and rainy conditions. Bottom controls include Back, previous arrow, next arrow, and Door Station selection. ### Weather Information From the live screen, tap the weather icon in the right sidebar to access the weather information for the current day. Tap: [next arrow icon] to open the weekly overview. 2 ## Page 3 MENU FEATURES > Figure: Menu navigation screen showing eight blank menu tiles in two rows. Bottom controls show Back, left arrow, right arrow, and Door Station selection. ### Menu navigation Tap the live video or press [Menu icon] to enter the menu. Tap: [Back icon] to go back. [left arrow icon] to navigate to the left side of the menu. [right arrow icon] to navigate to the right side of the menu. Press [Menu icon] to return to the live screen. > Figure: History screen showing menu tiles. A bell icon indicates a doorbell event and a running-person icon indicates a motion event. Bottom controls show Back, left arrow, right arrow, and Door Station selection. ### View History In the history, you can review past doorbell ([bell icon]) and motion events ([running-person icon]) with date and time. Tap: [left arrow icon] to navigate to previous events. [right arrow icon] to navigate to next events. Touch the image to display it in full-screen mode. To view the history of another door station, tap the ”Door Station selection” icon in the bottom right corner. > Figure: Sound settings screen. Two rows show volume up and volume down controls, left and right arrows, and labels “Doorbell Melody7” and “Storey call Ding Dong1”. Bottom controls show Back and Door Station selection. ### Volume up/down [Settings icon] ”Settings” → [Sound icon] ”Sound” Tap: [volume up icon] to turn the volume up. [volume down icon] to turn the volume down. > Figure: Sound-selection screen. Two rows show volume controls, left and right arrows, and labels “Doorbell Melody7” and “Storey call Ding Dong1”. Bottom controls show Back and Door Station selection. ### Select sound [Settings icon] ”Settings” → [Sound icon] ”Sound” Select the sound for the doorbell. Select the sound for the storey call if available. Tap: [left arrow icon] to select the previous sound. [right arrow icon] to select the next sound. > Figure: Light-bulb icon. ### Light on/off [light-bulb icon] Tap ”Light” to switch the infrared light of your door station on/off. > Figure: Key icon. ### Relais switch [key icon] Tap ”Relay” to get to the relay overview. Here you can trigger all connected relays. > Figure: Cleaning-mode icon showing a hand wiping a surface. ### Cleaning mode [Settings icon] Tap ”Settings” → [cleaning-mode icon] Tap ”Cleaning Mode” to deactivate the touch function for 30 seconds. 3