Driveway Gate

Measure the drivable opening: the clear gap between the inside faces of your two gate posts (or where the posts will go). Enter that number as Driveway Width. We size the steel frame from it automatically: a swing gate is built slightly narrower to leave hinge and latch clearance, and a slide gate is built wider so it covers the posts. Widths from 3 ft to 24 ft and heights from 3 ft to 8 ft are available.

Swing gates suit driveways with level ground and room for the leaves to open inward. Slide gates suit sloped driveways, short setbacks, or tight spaces, and they're the usual choice for automation on wide openings. Slide and center-opening swing gates go up to 24 ft wide; side-opening swing gates up to 14 ft 8 in. With ironwood, each swing panel is at most 10 ft (a 20 ft 9 in center swing or a 10 ft 5 in side swing); slide gates take ironwood at any width.

Center opening splits the gate into two leaves that meet in the middle (a double gate). Side opening is one single leaf that opens from one post. Center is the better fit for wide swing gates because each leaf is shorter and lighter; Side keeps a clean single-panel look and needs only one operator when automated.

Arch adds a 12-inch rise across the top rail, highest at the middle of the gate. Finials add spear-point caps on top of every full-height picket. You can choose either one, both together, or neither for a flat square top. The 3D preview updates as you toggle them.

Yes. Every gate is automation-ready, and we also sell slide and swing gate operators. Slide gates that will be automated must meet the UL 325 opening-size rule, so single or puppy pickets on a slide gate require ironwood infill; the configurator prevents a non-compliant combination automatically.

Frames are 2-inch American steel tube, finished with a satin powder coat over an anti-gassing primer, in black or white. Posts come in a standard 0.120-inch wall or a heavy-duty 3/16-inch wall for wide, heavy gates. Ironwood infill can be vertical or horizontal, or choose Do It Yourself to receive the frame ready for your own boards.

Each gate is handmade to order in San Jose, California. Production takes about 14 days, then LTL freight typically takes 3–5 business days to anywhere in the US, including Alaska and Hawaii. Local customers can also pick up at our San Jose shop (will-call). Your estimated ship date is shown before checkout. Wider gates ship in bolt-together sections no longer than 94 in, so every gate fits a standard crate; you bolt the sections together on site. If you prefer a panel up to 10 ft in one piece, choose One-piece panels (it ships in an oversize crate).

Yes. Every gate ships DIY-ready with large cane bolts and/or a gate latch depending on the configuration, and our free Swing Gate and Slide Gate Install Guides (PDF, under Documents on this page) walk through posts, hanging, and adjustment. Many homeowners install with a helper; for automation wiring, a licensed gate installer is recommended.

Yes. Add your gate to the cart and describe what you need in the cart's Optional section, such as a custom powder-coat color, a matching pedestrian gate, or a design change. You can also tap Ask a Gate Expert. We'll review it and confirm the price and details with you before your order is built.

The gate carries a lifetime limited structural warranty. Returns are accepted within 30 days of delivery (a 25% restocking fee applies), and any freight damage must be noted on the delivery receipt and reported to us within 48 hours so we can make it right quickly.