Driveway Gate
Custom Steel Driveway Gate - Swing or Slide, Sized to Your Opening, Handmade in the USA
Measure the opening from the inside of one post to the inside of the other.
The full gate height, including a 2-inch gap underneath so it clears the ground.
Unavailable
- On our hinge hardware a Side swing gate can be up to 14 ft 6 in wide, and a Center swing up to 29 ft. Choose Center opening or Slide for a wider gate.
None: All steel, no wood boards.
Manual: Opens by hand. Includes an 18 in cane bolt, and a key-lockable gate latch on a center swing.
- This configuration is unavailable
- Made in the USA
- Lifetime limited warranty
What's included with this Driveway Gate
- $55 Included
How to Install
Do it yourself, in a single day!
Gates built in our San Jose shop and installed on real driveways.
How It Arrives
-
What ships
Crated on a pallet · 614 lb · 44 × 75 × 94 in
-
Freight delivery
The carrier calls to book a delivery appointment. Curbside by default; liftgate service is priced into your freight quote if you have no dock.
-
Install time
About 1 day.
Questions & Answers
How do I measure my driveway for the right gate width?
How do I measure my driveway for the right gate width?
Measure the drivable opening: the clear gap between the inside faces of your two gate posts (or where the posts will go). Enter that number as Driveway Width. We size the steel frame from it automatically: a swing gate is built slightly narrower to leave hinge and latch clearance, and a slide gate is built wider so it covers the posts. Widths from 3 ft to 24 ft and heights from 3 ft to 8 ft are available.
Should I choose a swing gate or a slide gate?
Should I choose a swing gate or a slide gate?
Swing gates suit driveways with level ground and room for the leaves to open inward. Slide gates suit sloped driveways, short setbacks, or tight spaces, and they're the usual choice for automation on wide openings. Slide and center-opening swing gates go up to 24 ft wide; side-opening swing gates up to 14 ft 6 in. With ironwood, including Do It Yourself boards, swing gates go up to 20 ft 9 in on a center opening or 10 ft 5 in on a side opening; slide gates take ironwood at any width.
What is the difference between Center and Side opening?
What is the difference between Center and Side opening?
Center opening splits the gate into two leaves that meet in the middle (a double gate). Side opening is one single leaf that opens from one post. Center is the better fit for wide swing gates because each leaf is shorter and lighter; Side keeps a clean single-panel look and needs only one operator when automated.
What do the Arch and Finials add-ons look like?
What do the Arch and Finials add-ons look like?
Arch adds a 12-inch rise across the top rail, highest at the middle of the gate. Finials add spear-point caps on top of every full-height picket. You can choose either one, both together, or neither for a flat square top. The 3D preview updates as you toggle them.
What size are the pickets and how far apart are they?
What size are the pickets and how far apart are they?
Pickets are 3/4 in round steel tube. Single pickets sit 4 in on center, which leaves a 3-1/4 in clear gap between them. Double pickets add a full-height picket between each pair, so they sit 2 in on center with a 1-1/4 in gap. Puppy pickets add a short picket, about 17 in tall, between each pair along the bottom rail: the gap is 1-1/4 in along the bottom and 3-1/4 in above. When ironwood boards back the gate, the full-height pickets sit 7.25 in on center (a 6-1/2 in gap), and double or puppy pickets halve that to about 2-7/8 in.
Can I automate this gate with an electric opener?
Can I automate this gate with an electric opener?
Yes. Every gate is automation-ready, and we also sell slide and swing gate operators. Slide gates that will be automated must meet the UL 325 opening-size rule, so single or puppy pickets on a slide gate require face-mounted Ironwood boards; the configurator prevents a non-compliant combination automatically.
What materials and finish are used?
What materials and finish are used?
2-inch American steel tube frames with satin powder coat over zinc-rich primer, black or white. Posts: 0.120-inch or heavy-duty 3/16-inch wall. Vertical or horizontal Ironwood boards mount to the face/back with self-tapping screws; our steel frame is thick enough for the screws to thread into. Wood is not fitted between frame members. Do It Yourself includes internal frame members and no boards. For your own boards, confirm thickness and fastener specifications with our team.
How long does it take to build and ship my gate?
How long does it take to build and ship my gate?
Each gate is handmade to order in San Jose, California. Production takes about 14 days, then LTL freight typically takes 3–5 business days to anywhere in the US, including Alaska and Hawaii. Local customers can also pick up at our San Jose shop (will-call). Your estimated ship date is shown before checkout. Wider gates ship in bolt-together sections no longer than 94 in, so every gate fits a standard crate; you bolt the sections together on site. For fewer bolted joints, choose Panel Sections: Overlength (sections up to 10 ft). It ships over-length, which adds hundreds to the LTL freight.
Can I install the gate myself?
Can I install the gate myself?
Yes. Every gate ships DIY-ready with large cane bolts and/or a gate latch depending on the configuration, and our free Swing Gate and Slide Gate Install Guides (PDF, under Documents on this page) walk through posts, hanging, and adjustment. Many homeowners install with a helper; for automation wiring, a licensed gate installer is recommended.
Can I order a custom color, size, or design?
Can I order a custom color, size, or design?
Yes. Add your gate to the cart and describe what you need in the cart's Optional section, such as a custom powder-coat color, a matching pedestrian gate, or a design change. You can also tap Ask a Gate Expert. We'll review it and confirm the price and details with you before your order is built.
What warranty and return policy come with the gate?
What warranty and return policy come with the gate?
The gate carries a lifetime limited structural warranty. Returns are accepted within 30 days of delivery (a 25% restocking fee applies), and any freight damage must be noted on the delivery receipt and reported to us within 48 hours so we can make it right quickly.
Do you sell matching fence panels?
Do you sell matching fence panels?
Yes. The GateFrames Luxury Fence Panel is built exactly like this gate, from the same 2 in steel frame, pickets, ironwood and powder coat, with no opening, so the panel runs post to post. Choose the same style as your gate, a panel width from 2 to 10 ft (a longer run is several panels sharing posts), and None, 1 Post or 2 Posts (4 x 4 inch steel). Ordered together, the gate and fence ship in the same crate.
What's included with the gate?
What's included with the gate?
Every gate ships with its hinges and its 4 x 4 in steel posts, one cap each; there is no gate-only option. Manual swing gates also include an 18 in cane bolt (it holds the second leaf of a center gate, or a side swing gate open at 180 degrees), and a center swing adds a key-lockable LokkLatch gate latch where its leaves meet; center slide gates include the cane bolt, plus the V-track, wheels, stops and guide rollers. Each included item is listed under the price with a link to its own page.
Can I add a gate opener?
Can I add a gate opener?
Yes. Set Access to Automatic and choose an Automation Brand. We pick the opener model rated for your gate's leaf length and weight, add it at its regular price, and ship it free inside the gate's crate.
Which gate opener should I choose?
Which gate opener should I choose?
For swing gates, Nice is the best value: 12V DC, solar-ready, with battery backup. LiftMaster adds myQ app control from your phone and a nationwide service network. For slide gates, LiftMaster is the default; All-O-Matic's heavy-duty DC operators with battery backup suit long, heavy gates. Nice makes no slide opener we carry.
About
- Built to your exact opening, any width from 3 to 24 ft
- Heavy-duty 2 in American steel, powder-coated for the outdoors
- Your measurements double-checked before any steel is cut
A custom steel driveway gate, handmade in San Jose, California from heavy-duty American steel and built to the exact width and height of your driveway. Design it in five taps, see the price as you go, and have it built in about 14 business days.
Made in the USAAmerican steelSwing or slideAutomation-readyDIY-ready
Off-the-shelf gates come in a handful of widths, so you end up adjusting your posts to fit the gate. A GateFrames gate is the other way around: you enter your opening, and we build the steel frame to it, with the clearances already worked out. It blends metal and wood styling into a clean, custom look for entries where strength, outdoor durability and craftsmanship matter.
Start from a popular width
8 ft10 ft11 ft12 ft14 ft15 ft16 ft18 ft20 ft
Every width in between works too: set yours to the inch in the configurator.
Built around your driveway
Sized to your exact opening
Any drivable opening from 3 ft to 24 ft, any height from 3 ft to 8 ft. Swing gates are built narrower for hinge and latch clearance; slide gates are built wider to cover the posts.
Heavy-duty American steel
A 2 in steel tube frame, with a standard 1/8 in wall post, or a heavy-duty 3/16 in wall hinge post on heavier swing gates.
Finished for the outdoors
Satin powder coat over a zinc-rich primer, in black or white. Any other color by custom request.
Ready for an opener
Every gate is automation-ready. Add one of our slide or swing gate operators now or later.
DIY-ready
Ships with cane bolt(s) and/or a gate latch for your configuration, plus free Swing Gate and Slide Gate Install Guides.
Design yours in five taps
- Enter your opening. Driveway width and height, to the inch. The preview and price update as you go.
- Swing or slide, center or side. Center opening splits the gate into two leaves that meet in the middle; side opening is one single leaf.
- Pick your pickets. Single, puppy, double, or frame only.
- Add wood and a top. Vertical or horizontal Ironwood boards mounted on the face/back of the steel gate with self-tapping screws. Our steel frames are thick enough for the screws to thread into. Choose Do It Yourself for the steel frame, including its internal members and no boards, ready for your own boards. Top it with a 12 in arch, spear-point finials, both, or neither for a flat square top.
- Choose a color. Black or white satin powder coat, or request a custom color.
Swing or slide?
| Style | Best for | Max width |
|---|---|---|
| Swing, center | Wide, level drives | 24 ft* |
| Swing, side | One clean panel | 14 ft 6 in* |
| Slide | Slopes, tight spots | 24 ft |
Swing gates need level ground and room for the leaves to open inward; center opening keeps each leaf shorter and lighter on wide drives. Slide gates suit sloped driveways, short setbacks and tight spaces, and they're the usual choice for automating a wide opening. A side-opening gate needs only one operator when automated.
Which way the wood faces. Without pickets, the boards usually face the street; with pickets, they sit behind them and face your property. Center-swing and slide gates can be installed either way round. A side-swing gate with wood can't be turned around, so you choose its hinge post and the side the wood faces.
*Side swing gates go up to 14 ft 6 in wide on our hinge hardware. With ironwood, including Do It Yourself boards, swing gates go up to 20 ft 9 in wide with a center opening or 10 ft 5 in with a side opening. Slide gates take ironwood at every width. Gates up to 6 ft tall ship in bolt-together sections that fit a standard 94 in crate; taller gates ship in a longer crate that fits their posts. Choose Panel Sections: Overlength for fewer bolted joints; it ships over-length, which adds hundreds to the LTL freight.
From order to your driveway
Built in about 14 business days
Handmade to order in our San Jose shop. Your estimated ship date is shown before checkout.
Freight in 3–5 business days
LTL freight to anywhere in the US, including Alaska and Hawaii, fully insured. Note any damage on the delivery receipt and we make it right.
Or pick it up
Free factory pickup at GateFrames, 23 Las Colinas Ln #109, San Jose, CA 95119. This gate is built to order and is not stocked for immediate pickup. Ready for pickup within 14 business days (about 3 weeks). Order online and select Local pickup at checkout. We will contact you when your order is ready; wait for that confirmation before travelling to the factory.
What arrives, and what you'll need
- Your gate, built to your numbers and powder-coated
- Cane bolt(s) and/or a gate latch, by configuration
- Free Swing Gate and Slide Gate Install Guides (PDF, under Documents)
- A helper for hanging: many homeowners install it themselves
- A licensed gate installer for automation wiring (recommended)
- A slide or swing gate operator, if you're automating
Every gate is handmade to order, so your finished gate may vary slightly from the photos while reflecting the same quality and craftsmanship.
Buy with confidence
30-day returns
Return it within 30 days of delivery. Change-of-mind returns carry a 25% restocking fee; damage and defects are always on us.
- Expedited service available
- Free tech support
- Nationwide shipping
- Questions? Call (408) 260-5145
Specifications
23 specifications
| Size | |
|---|---|
| Drivable opening | 3 ft to 24 ft (36–288 in) |
| Height | 3 ft to 8 ft (36–96 in) |
| Slide gate max width | 24 ft |
| Side-opening swing max width | 14 ft 6 in (10 ft 5 in with ironwood) |
| Center-opening swing max width | 24 ft (20 ft 9 in with ironwood) |
| Build | |
| Frame | 2 in American steel tube |
| Pickets | 3/4 in round steel tube |
| Posts | 4 x 4 in steel: 1/8 in wall, 3/16 in wall hinge posts on heavier swing gates |
| Finish | Satin powder coat over zinc-rich primer |
| Colors | Black or white; custom colors by request |
| Options | |
| Motion | Swing or slide |
| Opening | Center (two leaves) or side (one leaf) |
| Top add-ons | 12 in arch, spear-point finials, or both |
| Pickets | Single, puppy, double, or frame only |
| Picket spacing | Single: 4 in on center (3-1/4 in gap). Double: 2 in on center (1-1/4 in gap). Puppy: 1-1/4 in gap in the bottom 17 in, 3-1/4 in above. With ironwood: 7.25 in on center |
| Ironwood | Vertical, horizontal, or DIY (frame ready for your boards) |
| Matching fence | Luxury Fence Panel, same frame, pickets and finish |
| Automation | |
| Operator-ready | Yes; slide infills limited to UL 325-compliant openings |
| Ordering | |
| Built in | San Jose, California (handmade to order) |
| Production time | About 14 days |
| Shipping | LTL freight to all 50 states, or will-call pickup |
| Included | 4 x 4 in steel posts with caps, plus the hardware for your configuration (hinges, cane bolt, latch or slide track) |
| Warranty | |
| Coverage | Lifetime limited structural warranty |